R.o.I. 01 642 4211, N.I. 028 203 60100 info@innovection.net

What kind of splashes occur in the semiconductor industry?

Semiconductors are materials having an intermediate electric conductivity between metals and insulators.

The semiconductors industry is essential for the field of electronics. These compounds make it possible to control at the same time and thanks to various ways, the quantity of power likely to cross them as well as the direction this poer can take. Semiconductos are essential to the good functioning of many modern appliances and are key products in the electronic systems.
Chemical risk

Liqid chemicals are use in the semiconductors industry in many applications such as the manufacture of microchips and the growth of crystals. The production requirements of this High Tech industry impose the massive setting up of clean roomsfor the various processes of manufacture and tratments including chemical ones. Wetchemistry is one of the most important technological stages in the realizatin ofelectronic devices. Smicnductors chemstry is mainly organized around the chemical treatment by solvents and acido-basic attacks of semiconductors.

Chemistry of solvents : the main chemicals used during this stage are trichloroethylene, acetone, isopropanol and also other alcohols such as denatured ethanol. The typical applications are the cleaning, the degreasing of the semiconductors and the shrinkage of residual resins (acetone).
Chemistry of acids and bases : the acid chemical agents used can be sulphuric acid, nitric acid, orthophosphoric acid, hydrochloric acid, hydrobromic acid or even citric acid. Solutions prepared associate sometimes a base (to oxidize the semiconductor) to an acid (to attack this oxide): hydrogen peroxide, ammonium hydroxide, sodium hydroxide or potasium hydroxide (mainly used for the attack of silicon). Acids and bases are mainly used to carry out attacks of semiconductors or to carry out surface preparations (deoxidation) and regeneration. A few acids used can sometimes be corrosive and toxic such as hydrofluoric acid, the mixtures containing iodine, bromine or bromide ions.
Particularity of hydrofluoric acid

In the electronic industry, especially the one dealing with the semiconductors production, hydrofluoric acid is the key product for manufacturing silicon components. Its capacity to attack the silicon oxide and to change it into a soluble compound is the starting point or many other application for cleaning and engrving. Hydrofluoric acid is used in association with nitric acid to engave silica in a mix with an ammonium fluoride solution, and also diluted as a cleaning agent or to remove residual oxides.

On line 03/02/2012

PREVOR – Moulin de Verville – 95760 VALMONDOIS CEDEX FRANCE – Tél : +33(0)1 30 34 76 76

Republic of Ireland

Unit 2,
Santry Hall Industrial Estate,
Santry,
Dublin 9, D09 Y2F7
Tel: +353 1 642 4211
Fax: +353 1 642 4212
Email: info@innovection.net

Registration No.

Company Registration Number: 422530

Northern Ireland

Innovection Ltd.,
18 Enterprise House
Lisburn Enterprise Centre
6 Ballinderry Road
Lisburn BT28 2BP
Tel: +44 28 203 60100
Fax: +353 1 642 4212
Email: info@innovection.net

Site by Willows Consulting Ltd